| Customization: | Available |
|---|---|
| Type: | Photoelectric Proximity Sensor |
| Principle: | Capacitive |
|
Still deciding? Get samples of US$ 19.29/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
NPN NO/NC
|
PSS-PM3DNBR-E2
|
PNP NO/NC
|
PSS-PM3DPBR-E2
|
|
Detection type
|
Polarized reflection
|
Distance adjustment
|
Single-turn potentiometer
|
|
Detection distance
|
3m*
|
Circuit protection
|
Short-circuit, overload, reverse polarity protection
|
|
Light source
|
Red light (640nm)
|
Connection
|
M12 4-core connector
|
|
Spot size
|
45*45mm@100cm
|
Indicator
|
Green LED: power, stable Yellow LED: output , short circuit or overload |
|
Output
|
NPN NO/NC or PNP NO/NC
|
Anti-ambient light
|
Anti-sunlight interference ≤ 10,000lux;
Response time ≤1ms
Incandescent light interference ≤ 30,000lux
|
|
Response time
|
≤0.5ms
|
Operating temperature
|
-25...55 ºC
|
|
Supply voltage
|
10…30 VDC
|
Storage temperature
|
-35...70 ºC
|
| Voltage drop | ≤1V |
Protection degree
|
IP67
|
|
Consumption current
|
≤20mA
|
Certification
|
CE
|
|
Load current
|
≤200mA
|
Material
|
Housing: PC+ABS;Filter: PMMA
|
|
Response time
|
≤1ms
|
Annex
|
M18 nut (4PCS), instruction manual
|
|
NO/NC adjustment
|
White wire is connected to the positive pole or hangon, NO mode; White wire is connected to the negative pole, NC mode
|
||
|
Remarks
|
*This data is the result of the TD-09 test of the reflector of the Lanbao PSS polarized sensor.
**The green LED becomes weaker, which means that the signal is weaker and the sensor is unstable; The yellow LED flashes, which means that the sensor is shorted
or overloaded;
|
||
){kind=link}