| Customization: | Available |
|---|---|
| Type: | Digital Laser Displacement Sensor |
| Output Signal Type: | RS-485/4...20mA + 0-5V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| RS-485 | PDE-CR100TGR |
| 4...20mA + 0-5V | PDE-CR100TGIU |
| Center distance | 100mm |
| Measuring range | ±35mm |
| Full scale(F.S.) | 65-135mm |
| Supply voltage | 12...24VDC |
| Consumption power | ≤960mW |
| Load current | ≤100mA |
| Voltage drop | <2V |
| Light source | Red laser(650nm);Laser level:Class 2 |
| Beam diameter | About Φ120μm(at 100mm) |
| Resolution | 10μm |
| Linear accuracy | ±0.1%F.S. |
| Repeat accuracy | 70μm |
| Output 1(Model selection) | Digital value:RS-485(Support Modbus protocol);Switch value:NPN/PNP and NO/NC settable |
| Output 2(Model selection) | Analog:4...20mA(Load resistance<300Ω)/0-5V;Switch value:NPN/PNP and NO/NC settable |
| Distance setting | RS-485:Keypress/RS-485 setting;Analog:Keypress setting |
| Response time | <10ms |
| Dimension | 45mm*27mm*21mm |
| Display | OLED display(Size:18*10mm) |
| Temperature drift | <0.03%F.S./ºC |
| Indicator | Laser working indicator:green light on;Switch output indicator:yellow light |
| Protection circuit | Short circuit protection,reverse polarity protection,overload protection |
| Built-in function | Slave address & Baud rate settings;Zero setting;Parameter query;Product self-inspection;Output setting;Ingle-point teaching/two-point teaching/three-point teaching;Window teaching;Factory data reset |
| Service environment | Operation temperature:-10…+45ºC;Storage temperature:-20…+60ºC;Ambient temperature:35...85%RH(No condensation) |
| Anti ambient light | Incandescent light:<3,000lux;Sunlight interference:≤10,000lux |
| Protection degre | IP65 |
| Material | Housing:Zinc alloy;Lens:PMMA;Diaplay:Glass |
| Vibration resist | 10...55Hz Double amplitude1mm,2H each in X,Y,Z directions |
| Impulse resista | 500m/s²(About 50G)3 times each in X,Y,Z directions |
| Connection | 2m Composite cable(0.2mm²) |
| Accessory | M4 screw(length:35mm)x2,nut x2,gasket x2,mounting bracket,operation manual |
){kind=link}